• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle against key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to start the engine.

Contrary to trackers Ghost does not transmit radio frequency signals & can't be detected by diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression that it is in your vehicle or van.

Anti-key cloning

The Ghost immobiliser was developed to prevent key cloning. The device is connected to your vehicle's CAN data network and creates an unique pin code using the factory buttons on your dashboard and steering. This stops the thief from being able to start your car. If the wrong PIN code is entered, your engine cannot be started and it will be impossible for them to leave with your pride and joy.

A ghost immobiliser cost immobiliser uses new technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or stolen the ghost immobiliser is a discreet electronic device that isn't easily detected by regular thieves, as it doesn't emit any radio signals and is completely silent.

The next generation of immobilisers are equipped to shield your car from a myriad of threats, including keys that are duplicated, key-hacking, and even relay attacks. It is also able to prevent thieves from adding the new key or replacing your ECU in the sense that it will not allow them to start your car without entering the correct PIN code first.

In contrast to other immobilisers the ghost immobiliser 2 doesn't require a key fobs or remotes to operate. It can be deactivated through an app that is installed on the smartphone of the driver. This makes it perfect for those times when you have to give your car over for valet parking or maintenance without keys.

The Autowatch Ghost-II represents the latest evolution of Ghost immobiliser. It is designed to be simple and easy to use while remaining as secure as is possible. This is accomplished by connecting the Ghost-II with the vehicle's CAN data network, ghost Immobiliser 2 meaning there are no wires that can be hidden or easily found. It has built-in features that allow you to deactivate the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method being used by professional car thieves to steal vehicles. Thieves have access to your vehicle's OBD with the help of a laptop, mobile application, and a few cables that can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they like, from resetting fault codes and tuning your car to stealing your pride and joy in just a few seconds.

It can protect your vehicle from being stolen by requiring a unique PIN number to be entered in conjunction with your key fob prior to you start the engine or drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit and is totally undetectable to any RF scanning or code grabbing technology. It has a Service/Valet Mode that allows your vehicle to start with no PIN code.

You'll also require cables with OBD pins that connect to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You'll also require a cable with OBD pins connected to CAN Bus. These cables can be purchased on eBay or Amazon for PS50. You then need to splice the cable into the wire harness of your car for example, the radio wiring harness.

Once the hacker has a connection to your vehicle's OBD port, they are able to send diagnostics requests to the system at high baud rates which will crash the CAN, and prevent systems within your vehicle from functioning. This could cause your car's engine to stall or even lock up.

No additional remotes or key fobs required.

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern cars all over the world. Using engine ECU software to stop cars from starting if a fake transponder signal is detected by it, an aftermarket immobiliser is an excellent way to safeguard your vehicle.

It is possible for a criminal in the event that they have the code to disable an immobiliser, and bypass it. The batteries in the majority of key fobs can be easily removed by prying it open and a burglar can make use of a simple tool to take out the immobiliser's circuit board and replace it with an empty. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in the CAN which cannot be detected by diagnostic tools such as those used by high-tech thieves. It also does not use a traditional key-fob with LED indicators, so it's not visible in plain sight.

You may have to turn off Autowatch's Ghost 2 automatic protection at times, such as during valet parking or during a service. The ghost CAN immobiliser comes with a specific mode for this, called 'Service Mode which can be activated with the touch of a button on your phone. The car can still be operated however the maximum speed is limited to 36mph for added security.

If you'd like to learn more about the TASSA certified ghost immobiliser, please contact us now to schedule a demonstration in our workshop. A member of the team will run through the entire process of the system's operation and will provide you with owner manuals, installation certification, Ghost 2 emergency card and security assurance.

Simple Change of PIN Code

Ghost is a next generation device that protects your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle's CAN data network, and a personal PIN code is programmed in it using buttons on your steering wheel & dash. The device does not emit RF signals, therefore it cannot be bypassed. This makes it difficult to be detected using sophisticated scans of RF and code-grabbing technologies that are used by modern thieves.

The PIN code sequence can be altered anytime you want to block prior drivers, and it even has an override code in the event of lost sequences. During installation, the installer will demonstrate how to do this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the vehicle without needing to know the pin code. This is a great option for customers who don't want their pin number to be revealed but still wish to leave their car with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons in your vehicle to create a unique and interchangeable PIN code sequence. The sequence is entered using the app on your smartphone. No extra LED indicators are thrown out, and your vehicle is secured without possibility of being disabled.

Every vehicle is tested

Unlike key fobs that require you to press buttons the ghost immobiliser is hidden under your dash or steering wheel so that only you know it's even there. The device is connected to the vehicle's CAN data network and the personalised PIN code is inserted using buttons that are already present on your vehicle. The system will not allow your car to start until this code is entered. This means that thieves cannot clone the keys of your car or access the OBD to hack into it.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, motorhomes and bicycles. It's also incredibly versatile and can be programmed to deactivate in a variety of situations. For instance, it can be programmed to enter Valet mode when the car is transported to a valet parking or a service provider. This means that your vehicle can be operated within a pre-determined 30mph speed limit and the ghost immobiliser will reactivate itself once it is returned to your property.

The device can be reset at any time to your personal PIN code. This is helpful if you forget the code or the device is inoperable, meaning that it's effectively as good as new again.

The device is unnoticed by anyone who doesn't know about it is. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data they send in order to identify which button was activated. This makes it a safe and reliable security solution that cannot be compromised by RF scanning, jamming or door lock pick sets.