• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is substantial, you may want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and do an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a simple process, but it's easier to do with someone else to assist in holding the frame in place.

Check that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to offer suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges may also become unbalanced due to wear, causing an opening between the frame and sash. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window repairs, can also become misaligned, again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.